Advertisement

A Simulation Study on the Hydration of Magnesium-Based Thermochemical Heat Storage System for Residential Buildings

  • Yi Wang
  • Zhenqian ChenEmail author
Conference paper
  • 235 Downloads
Part of the Environmental Science and Engineering book series (ESE)

Abstract

Thermochemical heat storage system has a great potential due to its advantages of high heat storage density and long storage time. In this paper, a thermochemical heat storage system is designed based on Mg(OH)2/MgO and a two-dimensional mathematical model of exothermic process of the thermochemical energy storage reactor is established, which can be applied in residential buildings. The heat storage and exothermic processes of the heat storage units (HSU) are investigated by numerical simulation. The third boundary condition is adopted and the temperature change of the heat transfer fluid (HTF) in the channel is considered. After modeling the whole system, some parameters of the system are optimized, including the size of HSU, the inlet temperature of HTF, and the pressure of reaction bed, which is helpful to guide the design of thermochemical heat storage equipment in future. In addition, the results reveal that the reaction limit is in good agreement with previous literature and the energy storage density of magnesium-based thermochemical energy storage system is much higher than ordinary phase change materials such as paraffin. The heat storage system is expected to be a new type of heat storage system.

Keywords

Thermochemical energy storage Magnesium hydroxide Numerical simulation Residential buildings 

References

  1. 1.
    Abedin, A.H., Rosen, M.A.: A critical review of thermochemical energy storage systems. Open Renew. Energy J. 4(4), 42–46 (2011)CrossRefGoogle Scholar
  2. 2.
    N’Tsoukpoe, K.E., et al.: A review on long-term sorption solar energy storage. Renew. Sustain. Energy Rev. 13(9), 2385–2396 (2009)CrossRefGoogle Scholar
  3. 3.
    Ding, Y., Riffat, S.B.: Thermochemical energy storage technologies for building applications: a state-of-the-art review. Int. J. Low-Carbon Technol. 8(2), 106–116 (2013)CrossRefGoogle Scholar
  4. 4.
    G. Ervin.: Solar heat storage using chemical reactions. Sol. Heat Storage Using Chem. React. 22(1), 51–61 (1977)CrossRefGoogle Scholar
  5. 5.
    Garg, H.P., et al.: Solar Thermal Energy Storage. D. Reidel, Netherlands (1985)CrossRefGoogle Scholar
  6. 6.
    Kato, Y., et al.: Durability to repetitive reaction of magnesium oxide/water reaction system for a heat pump. Appl. Therm. Eng. 18(18), 85–92 (1998)CrossRefGoogle Scholar
  7. 7.
    Razouk, R.I., Mikhail, R.S.: The sorption of water vapor on magnesium oxide. J. Phys. Chem. 59(7), 636–640 (1955)CrossRefGoogle Scholar
  8. 8.
    Kato, Y., et al.: Kinetic study of the hydration of magnesium oxide for a chemical heat pump. Appl. Therm. Eng. 16(11), 853–862 (1996)CrossRefGoogle Scholar
  9. 9.
    Kato, Y., et al.: Thermal analysis of a magnesium oxide/water chemical heat pump for cogeneration. Appl. Therm. Eng. 21(10), 1067–1081 (2001)CrossRefGoogle Scholar
  10. 10.
    Kato, Y., et al.: Thermal performance of a packed bed reactor of a chemical heat pump for cogeneration. Chem. Eng. Res. Des. 78(5), 745–748 (2000)CrossRefGoogle Scholar
  11. 11.
    Kato, Y., et al.: Magnesium oxide/water chemical heat pump to enhance energy utilization of a cogeneration system. Energy 30(11–12), 2144–2155 (2005)CrossRefGoogle Scholar
  12. 12.
    Zamengo, M., et al.: Composite block of magnesium hydroxide—expanded graphite for chemical heat storage and heat pump. Appl. Therm. Eng. 69(1–2), 29–38 (2014)CrossRefGoogle Scholar
  13. 13.
    Zamengo, M., et al.: Magnesium hydroxide—expanded graphite composite pellets for a packed bed reactor chemical heat pump. Appl. Therm. Eng. 61(2), 853–858 (2013)CrossRefGoogle Scholar
  14. 14.
    Zamengo, M., et al.: Thermochemical performance of magnesium hydroxide–expanded graphite pellets for chemical heat pump. Appl. Therm. Eng. 64(1–2), 339–347 (2014)CrossRefGoogle Scholar
  15. 15.
    Kim, S.T., et al.: Optimization of magnesium hydroxide composite material mixed with expanded graphite and calcium chloride for chemical heat pumps. Appl. Therm. Eng. 50(1), 485–490 (2013)CrossRefGoogle Scholar
  16. 16.
    Ishitobi, H., et al.: Dehydration and hydration behavior of metal-salt-modified materials for chemical heat pumps. Appl. Therm. Eng. 50(2), 1639–1644 (2013)CrossRefGoogle Scholar
  17. 17.
    Myagmarjav, O., et al.: Dehydration kinetic study of a chemical heat storage material with lithium bromide for a magnesium oxide/water chemical heat pump. Prog. Nucl. Energy 82, 153–158 (2015)CrossRefGoogle Scholar
  18. 18.
    Mastronardo, E., et al.: Efficiency improvement of heat storage materials for MgO/H2O/Mg(OH)2 chemical heat pumps. Appl. Energy 162, 31–39 (2016)CrossRefGoogle Scholar
  19. 19.
    Mastronardo, E., et al.: Thermochemical storage of middle temperature wasted heat by functionalize d C/Mg(OH)2 hybrid materials. Energies 10(1), 70 (2017)CrossRefGoogle Scholar
  20. 20.
    Linder, M., et al.: Thermochemical energy storage in kw-scale based on CaO/Ca(OH)2. Energy Procedia 49, 888–897 (2014)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.School of Energy and EnvironmentSoutheast UniversityNanjingPeople’s Republic of China
  2. 2.Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education of ChinaJiangsuPeople’s Republic of China
  3. 3.Jiangsu Province Key Laboratory of Solar Energy Science and TechnologyJiangsuPeople’s Republic of China

Personalised recommendations